Where is CenTex Woodland Co. based?

Barn demolition cost in Texas depends on the size and condition of the structure, site access, and what happens to the debris. A small outbuilding costs significantly less to remove than a large multi-bay barn with a concrete foundation. CenTex Woodland Co. provides free on-site estimates for all demolition projects — call (512) 635-2320 to get a quote.

Permit requirements for demolition in Texas vary by county, structure type, and whether utilities are connected to the building. Rural structures without active utility connections often require no permit. CenTex Woodland Co. walks through what applies to your specific project during the estimate so there are no surprises once work begins.

Most single-structure demolition projects — a barn, shed, or outbuilding — are completed in one to three days depending on size, construction type, and access conditions. Larger or more complex structures may take additional time. CenTex Woodland Co. provides a realistic timeline with the written quote.

CenTex Woodland Co. removes old barns, sheds, livestock shelters, hay storage buildings, detached garages, carports, small outbuildings, storm-damaged structures, and abandoned farm and ranch improvements. We handle rural residential demolition on acreage properties throughout Central Texas.

Yes. Partially collapsed or structurally compromised structures are one of the most common demolition requests on rural Central Texas properties. Experienced operators assess the safest removal approach based on the structure's condition before work begins. Safety is the first consideration on every demolition project.

CenTex Woodland Co. discusses debris handling during the estimate process. Depending on the structure and materials involved, debris can be hauled off-site, burned (where permitted and when appropriate), or processed on-site. We make sure the site is left in a clean, usable condition that supports your next step.

Concrete slabs can be broken up and removed as part of the demolition project or left in place depending on your plans for the site. If you're building a new structure in the same location or need a clean site for other reasons

Yes. CenTex Woodland Co. offers forestry mulching and land clearing alongside demolition, so you can take the property from structure removal to a fully prepared site with one contractor. Many landowners combine demolition and land clearing into a single project for efficiency and cost savings.

In most cases, demolition comes first. Removing structures clears the way for clearing equipment to operate across the full property without obstacles. However, every site is different — CenTex Woodland Co. will recommend the most efficient sequence based on your specific property and goals after reviewing the site.

Some older barns have salvageable material — timber beams, metal roofing, siding — that holds value. If salvage is a priority, it should be discussed before demolition begins because deconstruction (careful hand-removal of materials) is a different process than mechanical demolition and takes significantly longer. CenTex Woodland Co. can discuss options during the estimate.

Yes. Rural demolition often involves unpaved or limited access roads, structures in rougher condition than they appear, no utility disconnection support from a municipality, and a project that connects to larger land management goals. CenTex Woodland Co. specializes in rural acreage demolition and is equipped for the specific challenges that come with it.

Defensible space is the buffer zone of managed vegetation between a structure and the surrounding wildland. When properly maintained, it slows or stops the spread of wildfire toward the structure and gives firefighters a safer position from which to protect the property. Texas A&M Forest Service recommends a minimum of 30 feet of defensible space around all structures, with 100 feet being the standard for high-risk areas.

The most effective steps are creating defensible space around structures, removing cedar and dense brush that act as primary fuel sources, eliminating ladder fuels (low-hanging limbs and understory growth that carry fire into tree canopies), and clearing fence lines and access roads. CenTex Woodland Co. assesses each property individually and builds a fire mitigation plan around your specific conditions.

Ladder fuels are low-hanging branches, tall shrubs, and understory vegetation that form a continuous pathway for fire to travel from the ground level up into the canopy of taller trees. Once fire reaches the tree canopy it moves faster, burns hotter, and is far more difficult to control. Removing ladder fuels is a key part of any effective fire mitigation plan.

Yes — forestry mulching is one of the most effective methods for wildfire risk reduction. It removes cedar, brush, and ladder fuels without creating burn piles that introduce a new fire hazard. The mulch layer left behind holds moisture and resists re-ignition, making it significantly less combustible than standing dry vegetation.

Texas A&M Forest Service offers the Mechanical Fuel Reduction Grant and other cost-share programs that reimburse Central Texas landowners for qualifying mechanical fuel reduction work including forestry mulching. Priority is given to work within 100 feet of a structure. Eligibility and funding windows change each cycle — check current details directly with Texas A&M Forest Service. CenTex Woodland Co. provides the documentation needed to apply.

Texas A&M Forest Service recommends maintaining at least 30 feet of defensible space around all structures, with the highest standard being 100 feet for properties in high-risk areas. The first 0–5 feet immediately adjacent to the structure is the most critical zone. Slope, vegetation type, and property conditions can all influence how far the cleared zone should extend.

Bastrop County has one of the highest wildfire risk profiles in Texas due to its combination of loblolly pine forest, widespread cedar encroachment, and years of accumulated dry vegetation on many rural properties. The 2011 Bastrop Complex Fire — the most destructive in modern Texas history — burned more than 32,000 acres and destroyed over 1,600 homes. Those vegetation conditions remain present across the county today.

A fuel break is a strip of land where vegetation has been removed or reduced to create a barrier that slows the advance of wildfire. Fuel breaks are typically created along fence lines, property boundaries, or across open pasture. They can decrease fire intensity, provide access lanes for emergency vehicles, and slow incoming fire long enough for response crews to act.

Fire mitigation work is best done proactively — during cooler months before dry and windy conditions arrive. Spring and early summer are the highest-risk periods in Central Texas, so the ideal window for vegetation management is late fall through early spring. Landowners who wait until conditions are already dangerous often find that safe clearing work is no longer practical.

Cedar and brush regrow over time, so fire mitigation is not a one-time project. The frequency of follow-up work depends on vegetation types and regrowth rates on your specific property. Many Central Texas landowners schedule maintenance mulching every two to three years to keep fuel loads manageable and defensible space zones effective.

The wildland-urban interface (WUI) is the zone where developed land — homes, structures, and managed property — meets or intermingles with undeveloped wildland vegetation. Properties in the WUI are at the highest risk from wildfire because fire can move from the surrounding wildland directly to structures. Much of rural Central Texas, including properties in Bastrop, Lee, Fayette, and Williamson counties, falls within or adjacent to WUI zones.

Forestry mulching is a land clearing method that uses a single machine — a dedicated mulcher or a skid steer with a mulching head — to grind trees and brush into mulch in place. The machine's high-speed drum with carbide teeth cuts and shreds vegetation on contact and spreads the processed material across the ground as a mulch layer. No debris is hauled off and no burn piles are created.

Traditional land clearing uses bulldozers and excavators to push and pile vegetation, which then has to be burned or hauled away. Forestry mulching processes everything in a single pass and leaves the mulch on-site, eliminating burn piles and haul-off costs. For most rural properties with brush and cedar, mulching is faster and more cost-effective than traditional clearing.

Forestry mulching costs in Texas vary based on vegetation density, terrain, acreage, and site access. Light to moderate brush clears for less per acre than dense cedar thickets or heavy mixed timber. Because every property is different, CenTex Woodland Co. provides a free on-site estimate after reviewing your property. Call (512) 635-2320 to get started.

Forestry mulching removes cedar above the ground surface and grinds it into mulch, but cedar can resprout from root crowns over time. For long-term cedar control, periodic follow-up management is recommended. CenTex Woodland Co. will discuss a realistic maintenance approach for your specific property during the estimate process.

Mulching is almost always the safer and more practical option, especially in Central Texas where wildfire risk is elevated. Burning requires cut and dried brush, which is itself a fire hazard during preparation and a re-ignition risk as a pile afterward. Mulching processes cedar in place and leaves a ground layer that holds moisture rather than creating a concentrated fuel pile.

Most dedicated forestry mulchers can handle trees up to 6–8 inches in diameter, and some larger machines can take on trees 10–12 inches in diameter. For mature hardwood or large timber, traditional clearing equipment such as an excavator is typically combined with the mulcher for the most efficient result.

No — quite the opposite. The mulch layer left by forestry mulching conserves ground moisture, moderates soil temperature, reduces erosion, and breaks down over time to return nutrients to the soil. It is generally beneficial for the long-term health of the land.

For most rural land in Texas, no permit is required to clear brush and trees on your own private property. Exceptions include properties inside city limits, areas within a mapped floodplain, land with HOA or deed restrictions, or projects near a county road culvert or wetland area. CenTex Woodland Co. will walk through what applies to your specific property before work begins.

Yes — forestry mulching is one of the most effective tools for creating defensible space around homes and structures. It removes cedar, brush, and ladder fuels without leaving slash piles that would create a new fire hazard. In Bastrop County and throughout Central Texas, mulching is widely used for wildfire risk reduction around rural properties.

Most forestry mulching projects are completed in one to two days depending on acreage and vegetation density. Larger properties with very heavy cedar or dense timber may take longer. CenTex Woodland Co. provides a realistic timeline with every written quote so you can plan the rest of your project.

Yes. Forestry mulching allows for selective clearing — the operator can avoid and preserve specific trees while removing unwanted vegetation around them. This is one of the key advantages over dozer-based clearing, which causes more collateral damage to surrounding trees and root systems.

Tracked forestry mulchers perform better in wet conditions than wheeled equipment, but very saturated soils can still lead to ground compaction and rutting. For the best results and least site disruption, mulching is ideally scheduled during drier months. CenTex Woodland Co. monitors site conditions and advises customers when timing may affect the outcome.

Yes. CenTex Woodland Co. is fully insured on every project and every site. Proof of insurance is available upon request. Land clearing and demolition involve heavy equipment and specialized operations, and we take safety seriously on every job.

CenTex Woodland Co. was founded by Mike, who spent over 15 years managing ranches and rural properties throughout Central Texas before starting the company. That hands-on land management background is the foundation of how we approach every project.

CenTex Woodland Co. operates dedicated forestry mulchers, excavators, and skid steers matched to the terrain and vegetation conditions of each project. We use professional-grade equipment designed for rural acreage work — not repurposed residential machinery.

Call (512) 635-2320, email mike@centexwoodland.com, or fill out the quote request form at centexwoodland.com. We respond quickly and prioritize clear communication from the first contact.

Yes. Many of CenTex Woodland Co.'s customers live outside the immediate area and manage their property remotely. We communicate clearly throughout the project and can work from photos and aerial imagery for the initial assessment before scheduling the on-site visit.

CenTex Woodland Co. works primarily with rural landowners on 5–30 acre properties including recreational and hunting land, weekend and second homes, agricultural acreage, family-owned rural land, retirement properties, and properties being prepared for sale or new construction.

Yes. If you are not sure what your property needs — whether it is clearing, mulching, demolition, fire mitigation, or a combination — start with a call. Mike will discuss your goals for the land, ask the right questions, and recommend the services that make the most practical sense for your situation.

Yes. Many of CenTex Woodland Co.'s customers return for periodic maintenance — cedar and brush management, fence line clearing, and follow-up mulching — to keep their properties in good condition after the initial project is completed. Ongoing maintenance is discussed at the end of every project so customers understand what to expect over time.

CenTex Woodland Co. appreciates customer feedback. You can leave a Google review at the link on the website or by searching CenTex Woodland Co. on Google Maps. Reviews help other rural landowners find dependable service in Central Texas.

CenTex Woodland Co. combines 15+ years of hands-on rural land management experience with professional equipment, fast communication, and honest pricing. We are a local company based in Lexington with deep knowledge of Central Texas terrain and vegetation — not a regional chain. Every project gets personal attention and a crew that shows up and delivers what was quoted.

Habitat restoration is the process of improving land to support native species, wildlife, and natural ecosystems. On Central Texas rural properties, this typically involves removing invasive species like cedar, selectively clearing overgrown vegetation, reestablishing native grasses and plants, and managing the land to create better conditions for wildlife, game species, and natural biodiversity.

Yes — forestry mulching is one of the most effective tools for habitat restoration on rural properties. By selectively removing cedar and invasive brush while preserving desirable native trees, mulching can restore open understory, reestablish native grass cover, improve food sources and bedding areas for deer and other game, and significantly improve the overall habitat quality of the land.

Yes. Many Central Texas landowners qualify for wildlife habitat restoration programs, including government grant-funded projects. Certain species — such as the Houston Toad, which has habitat in the Lost Pines region of Bastrop County — require specific vegetation management practices that often involve forestry mulching. CenTex Woodland Co. understands how mulching supports these programs and can prepare your land to meet program requirements.

Cedar encroachment reduces native grass cover, consumes groundwater that native species depend on, and creates dense monoculture conditions that reduce biodiversity. Removing cedar opens the canopy, allows sunlight to reach the ground, and creates conditions where native grasses and forbs can re-establish — improving food sources, bedding areas, and habitat diversity for deer, turkey, quail, and other wildlife.

Standard land clearing is typically done to prepare land for a new use — construction, agriculture, or improved access. Habitat restoration focuses on improving the ecological function and wildlife value of the land. The clearing done in habitat restoration is selective and strategic — removing invasive or undesirable species while preserving or encouraging native vegetation that benefits wildlife.

In Texas, landowners may qualify for a wildlife management use valuation if their property is currently under an agricultural valuation and they implement qualifying wildlife management practices. The Texas Parks and Wildlife Department provides guidelines for what practices qualify. Land clearing and habitat improvement work done by CenTex Woodland Co. may support these requirements — consult a wildlife biologist or your county appraisal district for specifics.

Yes. The mulch layer left by forestry mulching improves moisture retention and soil conditions that support native grass re-establishment. In many cases, native grasses and forbs will return naturally in cleared areas once cedar and invasive brush are removed and sunlight reaches the ground. In some cases, overseeding native grasses is recommended as a follow-up step.

CenTex Woodland Co. removes cedar (Ashe juniper), yaupon holly, chinaberry, and other invasive or encroaching species that reduce the habitat quality of Central Texas rural land. The specific species targeted in each project are based on the property's current condition and the landowner's habitat goals.

Improved wildlife habitat can meaningfully increase the value of rural land in Texas, particularly for buyers interested in hunting, conservation, or wildlife management. A property with established habitat improvements — open native grass, managed cedar, food plots, and water features — typically commands a premium over unmanaged acreage of comparable size.

Yes. Site preparation for food plots — clearing vegetation, preparing the soil surface, and creating the right conditions for planting — is part of the ranch improvement and habitat restoration services CenTex Woodland Co. provides. Food plot preparation is typically combined with broader cedar and brush management work.

Land clearing is the process of removing trees and brush from a piece of land to prepare it for a new use — whether that's new construction

Land clearing costs in Texas depend on vegetation density, acreage, terrain, and access conditions. Light brush clears for significantly less per acre than heavy timber or dense cedar. Anyone who gives you a firm per-acre price over the phone without seeing the property is guessing. CenTex Woodland Co. walks every property before quoting to give you an honest, accurate estimate.

Most rural private landowners in Texas do not need a permit to clear trees and brush on their own property. However, properties in or near floodplains, wetlands, city limits, or with HOA restrictions may have additional requirements. Always verify with your local authority before beginning work if any of these conditions apply.

Timeline depends on vegetation density and type. Ten acres of light brush may be completed in a few days. Ten acres of heavy cedar or mixed timber could take a week or more. Terrain, access, and weather also factor in. CenTex Woodland Co. provides a realistic completion estimate with every quote.

For most Central Texas properties, forestry mulching is the most efficient method for cedar removal. It grinds the cedar in place, eliminates the need for burn piles, and leaves a mulch layer that improves soil health. For very dense cedar thickets or areas with large-diameter cedar, combining a mulcher with excavator work gives the most thorough result.

Forestry mulching has minimal topsoil impact because the machine operates above the ground surface and the mulch layer actually reduces erosion. Heavy dozer work causes more disruption. CenTex Woodland Co. uses the right equipment for each project to minimize soil disturbance and protect the long-term health of your land.

Mark any trees or features you want preserved before the crew arrives. Confirm property boundaries so the right areas are cleared. Identify and communicate any underground utilities, septic systems, or buried lines. The clearer your goals going in, the more efficiently the project runs. CenTex Woodland Co. walks the property with you before starting work.

Yes. Clearing overgrown acreage improves usability, improves visual presentation, and makes it easier for buyers to see the potential of the land. In Central Texas, cedar and brush encroachment that has gone unmanaged for years can significantly reduce the perceived and appraised value of rural property.

With forestry mulching, all material is processed on-site and stays as a mulch layer — nothing is hauled off. For traditional clearing with heavy equipment, debris is typically piled and either burned (subject to local burn ban rules), hauled off, or chipped. CenTex Woodland Co. discusses disposal options during the quoting process.

Yes. CenTex Woodland Co. takes care around fence lines and property boundaries. Forestry mulching is particularly well-suited for fence line work because the machine can clear tight to the fence without the impact that dozer blades cause. We confirm property lines and flag sensitive areas before clearing begins.

The terms are often used interchangeably, though lot clearing typically refers to smaller or residential-scale sites while land clearing tends to refer to larger rural or agricultural acreage. The equipment and methods used depend on the size of the project and the vegetation type, not the label used.

Land clearing is the broader category — it describes the goal of removing vegetation from a property. Forestry mulching is one specific method used to accomplish land clearing. Other methods include bulldozer work, hand clearing, and burning. Mulching is often the preferred method for rural Texas properties because it is cleaner, faster, and avoids burn pile hazards.

What is land clearing?

CenTex Woodland Co. prices projects based on the specific conditions of each property — acreage, vegetation density, terrain, access, and scope of work. We provide a ballpark range in the initial conversation and follow with a clear written quote after an on-site visit. We do not quote firm prices over the phone without seeing the property, because every site is different.

Yes. CenTex Woodland Co. provides free on-site estimates for all projects. Call (512) 635-2320 or email mike@centexwoodland.com to schedule a property visit.

In most cases, CenTex Woodland Co. can provide a ballpark range within 24–48 hours of the initial conversation and schedule an on-site visit shortly after. We understand that many customers are on a timeline — for construction, sale, or fire season — and we prioritize fast response and clear communication from the first contact.

The main pricing factors are acreage (for clearing), structure size and condition (for demolition), vegetation density, terrain and slope, site access quality, and what will be done with debris after the project. Jobs that require hauling debris off-site cost more than mulching projects where material stays on the ground. CenTex Woodland Co. explains all cost factors clearly during the estimate.

Yes. CenTex Woodland Co. typically requires a deposit before scheduling a project. This secures your spot on the calendar and allows equipment mobilization planning to begin. The remaining balance is due according to the project agreement. All payment terms are outlined clearly in the written quote before work begins.

Yes — larger projects typically have a lower per-acre rate than smaller ones because mobilization and setup costs are spread across more acreage. A 1-acre clearing job will cost more per acre than a 20-acre project of the same vegetation density. Total project cost and per-acre rate are both included in CenTex Woodland Co.'s written quotes.

CenTex Woodland Co. provides written quotes that reflect the project scope after an on-site assessment. If conditions at the site differ significantly from what was discussed — for example, the vegetation is much denser than it appeared in photos — we communicate that before work begins. We do not change prices without prior discussion and customer agreement.

CenTex Woodland Co. can often provide a general ballpark range from photos or aerial imagery, but an on-site visit is required for a firm written quote. Aerial images and photos don't always capture terrain, access conditions, or vegetation density accurately enough to price a job with confidence.

Projects farther from CenTex Woodland Co.'s base in Lexington may include a mobilization cost for equipment transport. This is discussed upfront and included in the written quote — there are no hidden travel fees added after the fact.

Before the estimator arrives, mark or identify any trees or features you want preserved, confirm your property boundaries, and be ready to describe what you want to accomplish. If you have a construction timeline, builder contact, or pending sale date, share that information — it helps us sequence the project to support your goals.

CenTex Woodland Co. provides a range of ranch improvement services for Central Texas rural properties including brush management, fence line clearing, access road clearing and maintenance, pond and tank clearing, overgrown pasture reclamation, and site preparation for new improvements. These services are often combined with land clearing and forestry mulching work.

Fence line maintenance frequency depends on vegetation type and growth rates on your specific property. In areas with aggressive cedar or brush growth, annual or biennial clearing keeps fence lines accessible and functional. CenTex Woodland Co. can assess your fence lines and recommend a realistic maintenance schedule.

Yes. Cedar encroachment is one of the most significant factors reducing grazing land productivity in Central Texas. Cedar competes aggressively with grasses for water and sunlight. Removing cedar and reclaiming overgrown pasture through clearing or mulching can dramatically improve grass cover, carrying capacity, and the overall productivity of grazing land.

The most effective approach for Central Texas pasture reclamation is forestry mulching. The mulcher removes cedar and brush, grinds it into mulch on-site, and leaves conditions that support native grass re-establishment. In areas with severe cedar encroachment, follow-up herbicide treatment may be recommended to control resprouting. CenTex Woodland Co. assesses the specific conditions on your property before recommending the best approach.

Yes. Clearing brush and cedar from around ponds and stock tanks improves access, reduces debris and sediment contribution, and improves the overall condition of the water feature. This is a common ranch improvement request on Central Texas properties and can be combined with broader land clearing or mulching work.

Yes. Clearing and grubbing fence lines before installation makes the fencing process faster and significantly easier. CenTex Woodland Co. can clear the proposed fence route of cedar, brush, and overgrown vegetation so the fence crew has a clean, accessible corridor to work in.

Access road improvements typically involve clearing encroaching vegetation from both sides of the road corridor, removing overhanging limbs, and grading or filling low spots if needed. CenTex Woodland Co. handles the vegetation clearing component — forestry mulching is particularly effective for clearing overgrown access road corridors quickly.

Yes. Selective clearing — removing specific trees or brush to open sightlines, improve views, or create more usable open space — is a common request on rural home and recreation properties. Forestry mulching is well-suited for this type of work because it allows precise selective clearing without the collateral damage that dozer-based clearing causes.

Yes. Brush management — selectively clearing cedar and invasive species while preserving native cover and mast-producing trees — is one of the most impactful improvements a hunting property can receive. CenTex Woodland Co. tailors clearing work to improve habitat quality, movement corridors, and visibility for hunters while maintaining the natural character of the land.

Late fall through early spring is generally the best window for ranch improvement work in Central Texas. Cooler temperatures make equipment operation easier, vegetation is less actively growing, and the work causes less stress to desirable plants and grasses. Planning ranch improvements during this window also allows native grass and vegetation to re-establish before the summer growing season.

Right-of-way (ROW) clearing is the removal of vegetation from a defined corridor — typically along roads, utility lines, pipelines, fence lines, or other linear infrastructure. Regular ROW clearing keeps corridors clear of encroaching vegetation, maintains access for vehicles and equipment, and ensures infrastructure remains accessible and functional.

ROW clearing frequency depends on vegetation growth rates, the type of infrastructure involved, and access requirements. In Central Texas, cedar and brush can reoccupy a cleared corridor in two to three years without follow-up management. Many landowners and utility operators schedule ROW clearing every one to three years to maintain safe and functional corridors.

Yes — forestry mulching is one of the most efficient methods for right-of-way clearing, particularly for fence lines, private roads, and rural utility corridors. The machine processes vegetation in a single pass along the corridor without creating burn piles, and can work close to fences and infrastructure without causing damage.

CenTex Woodland Co. provides right-of-way clearing for private landowners and rural properties throughout Central Texas. For large-scale utility or pipeline ROW projects, contact us to discuss project scope and service area coverage.

ROW clearing removes encroaching cedar, brush, scrub, overgrown grass, and small trees that have grown into a road, fence line, or utility corridor. The goal is to restore a clear, defined corridor that is accessible and functional. Desirable trees along the corridor boundary can typically be preserved during the clearing process.

Yes. One of the most practical benefits of fence line and access road clearing is ensuring that emergency vehicles — fire trucks, ambulances, and other responders — can reach structures on the property without obstruction. This is especially important for wildfire emergency response, where access road clearing directly supports the ability of crews to reach and protect structures.

Standard access road corridors are typically cleared 12–20 feet wide to allow vehicle passage. For emergency vehicle access, wider corridors of 20 feet or more may be recommended. Fence line corridors are typically cleared 10–15 feet to allow maintenance access. CenTex Woodland Co. confirms your access and clearance requirements before beginning ROW work.

Fence line clearing is a type of right-of-way clearing focused specifically on the corridor along a fence. Both involve removing encroaching vegetation from a defined linear corridor. CenTex Woodland Co. provides both as part of its ROW and ranch improvement services.

Yes. CenTex Woodland Co. clears vegetation on privately owned land adjacent to county or rural roads. Any work within a county road right-of-way itself (the publicly owned portion) may require coordination with the county. We clarify property boundaries and any applicable limitations during the estimate process.

Yes. Cleared fence lines and access roads reduce the continuous fuel bed that allows wildfire to travel across a property. They also create natural fuel breaks and ensure emergency vehicle access is available if fire reaches the property. ROW clearing is specifically recommended by Texas A&M Forest Service as part of a comprehensive wildfire risk reduction plan.

CenTex Woodland Co. is based in Lexington, Texas at 2158 County Road 333, Lexington, TX 78947. Our central location in Lee County allows us to efficiently serve landowners throughout Central Texas.

CenTex Woodland Co. serves rural landowners throughout Central Texas including Lee County, Bastrop County, Fayette County, Williamson County, Milam County, Burleson County, Brazos County, and surrounding areas. If you are unsure whether your property is within our service area, call (512) 635-2320 and we will confirm quickly.

Yes. While CenTex Woodland Co. is based in Lexington, we regularly serve customers across a wide area of Central Texas including Bastrop, Giddings, Georgetown, La Grange, Bryan–College Station, Smithville, Elgin, Taylor, and many surrounding rural communities.

CenTex Woodland Co. focuses primarily on rural acreage properties. Contact us with your project details and we will let you know whether the scope is a good fit. For small residential lot clearing, we recommend confirming scope and access requirements during the initial call.

CenTex Woodland Co. handles a wide range of project scales — from targeted structure removal and site preparation on smaller parcels to large-scale land clearing and habitat restoration on multi-hundred-acre ranch properties. Project scope and timeline are discussed in detail during the estimate process.

CenTex Woodland Co. focuses primarily on residential landowners and rural acreage properties. For commercial projects, contact us with the project details and we will assess whether the scope and location are a fit.

Yes. Bastrop County is a core service area for CenTex Woodland Co. We work regularly on rural properties throughout the county including Bastrop, Smithville, Paige, Cedar Creek, Red Rock, and McDade.

Yes. CenTex Woodland Co. serves landowners throughout Fayette County including La Grange, Schulenburg, Flatonia, Weimar, and surrounding rural areas. Based in Lexington, we are a short drive from La Grange and work regularly in Fayette County.

Yes. Lee County is CenTex Woodland Co.'s home county. We serve landowners throughout the county including Giddings, Lexington, Dime Box, Lincoln, and surrounding rural communities.

Call (512) 635-2320 or email mike@centexwoodland.com to start the conversation. We will discuss your property and project, provide an initial estimate range, and schedule an on-site visit to assess the full scope before providing a written quote.

Site preparation is the process of clearing, grading, and preparing land to be ready for construction. It typically follows land clearing and includes removing trees, stumps, and roots from the build area, establishing grade, and ensuring the site is clean and stable enough for builders and equipment to begin work. CenTex Woodland Co. handles the vegetation clearing and demolition components of site prep.

Yes. Before construction begins on rural acreage, the build site needs to be cleared of trees, brush, stumps, and root systems that would interfere with the foundation, utilities, or driveway. Proper site preparation sets up every phase of construction that follows. CenTex Woodland Co. provides clearing and structure removal services to prepare rural homesites across Central Texas.

Site preparation typically includes clearing the build area of trees and brush, removing stumps and roots in the foundation footprint, demolishing any existing structures on the site, and establishing rough access for construction equipment. CenTex Woodland Co. handles clearing and demolition as part of site prep and can coordinate sequencing with your builder.

Yes. Stump and root removal is often part of site preparation for new construction, particularly in the foundation and driveway footprint where buried root systems can cause problems. Forestry mulching grinds stumps and roots to approximately ground level. For deeper removal, additional excavation work may be required depending on what the site will be used for.

Site preparation — clearing and demolition — should happen before any other construction activity begins. Ideally it is scheduled four to eight weeks before the planned construction start date, giving the cleared site time to settle and allowing builders to assess the prepared ground before breaking ground.

Yes. CenTex Woodland Co. is happy to coordinate with your builder, engineer, or contractor on sequencing and site access. Knowing the builder's requirements and timeline allows us to prepare the site in a way that supports the construction process from day one.

Land clearing is the broader process of removing vegetation from a property. Site preparation is more specific — it refers to preparing a defined area for construction by removing not just surface vegetation but also stumps, roots, and debris that would interfere with building. Site preparation is what happens after clearing and before construction begins.

Proper site preparation typically reduces construction costs by eliminating surprises — buried roots, hidden debris, and unstable soil conditions that cause delays and change orders. A well-prepared site allows builders to work more efficiently and gives engineers and surveyors an accurate picture of the ground conditions before design decisions are finalized.

Yes. CenTex Woodland Co. provides site clearing and structure removal for barndominium and metal building projects on rural Central Texas properties. We handle clearing the build area and any demolition of existing structures so your site is ready for the concrete pad and building crew.

Site preparation typically includes clearing the build area itself. Utility trenches and easement corridors are often cleared separately. If your project involves clearing for a septic system, well, or utility line route, discuss the full scope with CenTex Woodland Co. during the estimate so everything is accounted for in the quote.

How much does it cost to demolish a barn in Texas?

What is defensible space and why does it matter?

What is forestry mulching?

Is CenTex Woodland Co. insured?

What is habitat restoration on rural land?

How does CenTex Woodland Co. price its projects?

What ranch improvement services does CenTex Woodland Co. offer?

What is right-of-way clearing?

What is site preparation for construction in Central Texas?